Shop

73 artikel gefunden.

RESET

Injection pump Lucas in exchange

Org. Art.-Nr: DPA3233F700

LT-Art.-Nr: 1017334

CHF 1,715.00

Injection pump Lucas in exchange

Org. Art.-Nr: DPA3233F420

LT-Art.-Nr: 1017333

CHF 1,646.45

Injection pump Bosch replica in exchange

Org. Art.-Nr: 36.040

LT-Art.-Nr: 1017299

CHF 2,000.00

Bosch injection pump in exchange

Org. Art.-Nr: DAG-VE/CL134-4

LT-Art.-Nr: 1017297

CHF 2,150.00

Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop does not assume any assembly and disassembly costs.
This is an alternative pump to the Bosch version, which is no longer available.
New shut-off via ignition lock and solenoid valve.

Injection lines, gas actuation, feed line, return line and shut-off via ignition lock must all be adjusted!
Therefore, adjust according to the textbook (markings are no longer correct).
Before replacing the pump, wash the engine clean! Check fuel (petrol, water or other impurities).
If the pump is mechanically defective, it is essential to replace the fuel and flush it out because of microchips. 1.

1. set engine flywheel to start injection Inject Bosch (working stroke 1 cylinder) (cover on left side of flywheel)
Turn the pump in the direction of rotation until the keyway is aligned with the first cylinder at the pipe connection nipple. 3.
Install the injection pump (note that the markings on the injection pump gearwheel no longer match). 4.
4. fine adjustment with dial gauge (Inject Bosch at flywheel, the injection pump piston must have 1 mm stroke).
Can be measured with a dial gauge on the plug in the middle of the injection line connections on the injection pump.

(Attention: For 3 cylinder injection pumps the piston of the 6 cylinder pump was used!)