Filters
Default
Kategorien
Shop
1181 artikel gefunden.
  1. Shop
  2. Land
  3. New Holland
  4. L - 1181 Artikel
Sortieren nach :
Default
Filters
  • Brand
  • Voltage
  • Amperage
  • Länge
  • Version
  • Lubrication
  • Nominal diameter D1
  • Second nominal diameter D1
  • Sleeve diameter D2
  • Second sleeve diameter D2
  • Max. lug spacing B1
  • Nominal length
  • Sleeve length L2
  • Ø belt pulley
  • W Connection
  • Labels
  • Tags
RESET
Spring washer M8 DIN 127 B
Org. Art.-Nr: 83990583
LT-Art.-Nr: 1001680
CHF 1.50
Inner diameter: 8 mm
Intermediate disc 52.50x111.50x4.00mm Occasion
Org. Art.-Nr: 5118101-SH
LT-Art.-Nr: 1074207
CHF 43.00
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Special screw
Org. Art.-Nr: 5163833-LT
LT-Art.-Nr: 1007193
CHF 34.60
This item is customised and cannot be returned!
Flywheel in exchange
Org. Art.-Nr: 99440514-LT
LT-Art.-Nr: 1017073
CHF 163.00
Bulb halogen 12V 55W
Org. Art.-Nr: 1102258
LT-Art.-Nr: 1001198
CHF 7.05
Starter Bosch 12V 2.6kW
Org. Art.-Nr: 5801441816
LT-Art.-Nr: 1015846
CHF 679.60
3 cylinder models

For quality reasons LT recommends the Mahle starter 1065036
Engine flywheel in exchange
Org. Art.-Nr: 99440518-AT
LT-Art.-Nr: 1017075
CHF 257.00
If the flywheel can no longer be reworked to a minimum dimension of less than 71.9mm, the customer will be invoiced for the difference of 1671.00 between the replacement part and the new part!
Secondhand
Engine flywheel single clutch
Org. Art.-Nr: 99440518-LT
LT-Art.-Nr: 1015023
CHF 2,000.00
Bending bar support 90/94/L/35/TL/T5000
Org. Art.-Nr: 00000030-LT
LT-Art.-Nr: 1016024
CHF 275.00
incl.4 screws M16x1.5x130

Suitable for:
55-90 60-90 65-90 70-90 80-90
60-94 65-94 72-94 82-94 88-94
L60 L65 L75 L85 L95
TL70 TL80 TL90 TL100
T5030 T5040 T5050 T5060 T5070
Protective cap for 3 switches 60x85mm
Org. Art.-Nr: 5169088
LT-Art.-Nr: 1007470
CHF 34.95
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Top Gasket Set 8045.06 Ø100mm
Org. Art.-Nr: 1940124
LT-Art.-Nr: 1000472
CHF 453.25
Alto mark on the head gasket upwards.
The required tightening torques of the cylinder head bolts must be carried out in three stages when the engine is cold.
Thread and screw head surface slightly oiled.

Tightening torque of the cylinder head bolts M12x1.25x122.5mm
1 Pre-stage 60Nm
2 Check 60Nm
3 90° angular degrees
4 90° degrees
Spiral from the inside to the outside !
Cylinder head does not need to be retightened later !
Lower link right CBM 90x18x930mm
Org. Art.-Nr: 5134560-LT
LT-Art.-Nr: 1002263
CHF 648.00