Filters
Name: A bis Z
Shop
140 artikel gefunden.
  1. Shop
  2. Land
  3. Fiat
  4. Motor - 140 Artikel
Sortieren nach :
Name: A bis Z
Filters
  • Brand
  • Labels
  • Tags
RESET
Adjusting screw valve tappet
Org. Art.-Nr: 4699783
LT-Art.-Nr: 1000624
CHF 6.25
Balance weight 29 teeth
Org. Art.-Nr: 4791709
LT-Art.-Nr: 1050155
CHF 233.40
Balance weight complete
Org. Art.-Nr: 500374916
LT-Art.-Nr: 1014897
CHF 1,031.15
Bearing bush 18x21x22.5mm
Org. Art.-Nr: 4682937
LT-Art.-Nr: 1000616
CHF 42.70
Bearing bush rocker arm 18x21x20mm
Org. Art.-Nr: 4577359
LT-Art.-Nr: 1000584
CHF 48.55
Bearing set camshaft (3 pieces)
Org. Art.-Nr: 4603449-LT
LT-Art.-Nr: 1057919
CHF 44.00
Blind hole cover 12mm
Org. Art.-Nr: 16987801
LT-Art.-Nr: 1001557
CHF 7.15
Blind hole cover 60x2mm
Org. Art.-Nr: 10160704
LT-Art.-Nr: 1001538
CHF 8.60
Bolt
Org. Art.-Nr: 4599551
LT-Art.-Nr: 1000589
CHF 10.40
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
SALE
Bosch injection pump in exchange
Org. Art.-Nr: DAG-VE/CL134-4
LT-Art.-Nr: 1017297
CHF 2,150.00
Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop does not assume any assembly and disassembly costs.
This is an alternative pump to the Bosch version, which is no longer available.
New shut-off via ignition lock and solenoid valve.

Injection lines, gas actuation, feed line, return line and shut-off via ignition lock must all be adjusted!
Therefore, adjust according to the textbook (markings are no longer correct).
Before replacing the pump, wash the engine clean! Check fuel (petrol, water or other impurities).
If the pump is mechanically defective, it is essential to replace the fuel and flush it out because of microchips. 1.

1. set engine flywheel to start injection Inject Bosch (working stroke 1 cylinder) (cover on left side of flywheel)
Turn the pump in the direction of rotation until the keyway is aligned with the first cylinder at the pipe connection nipple. 3.
Install the injection pump (note that the markings on the injection pump gearwheel no longer match). 4.
4. fine adjustment with dial gauge (Inject Bosch at flywheel, the injection pump piston must have 1 mm stroke).
Can be measured with a dial gauge on the plug in the middle of the injection line connections on the injection pump.

(Attention: For 3 cylinder injection pumps the piston of the 6 cylinder pump was used!)
Bosch injection pump in exchange
Org. Art.-Nr: 0460414115
LT-Art.-Nr: 1015421
CHF 1,756.85
Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop is not responsible for assembly and disassembly.
Bosch injection pump in exchange
Org. Art.-Nr: 0460414024
LT-Art.-Nr: 1015419
CHF 2,230.75
Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop is not responsible for assembly and disassembly.