Filters
Name: Z bis A
Shop
62 artikel gefunden.
  1. Shop
  2. Land
  3. Fiat
  4. 450 | 850 | 1000 | 1300
  5. Motorzubehör - 62 Artikel
Sortieren nach :
Name: Z bis A
Filters
  • Brand
  • Labels
  • Tags
RESET
Drain cock M16x1.5 Used
Org. Art.-Nr: 4573802-SH
LT-Art.-Nr: 1073812
CHF 50.00
Deckel Kraftstofffilter CAV
Org. Art.-Nr: 9927916
LT-Art.-Nr: 1009332
CHF 95.80
Copper ring 11.2x21x2mm
Org. Art.-Nr: 767113
LT-Art.-Nr: 1004705
CHF 5.20
Outer diameter: 21 mm
Inner diameter: 11.2 mm
Width: 2 mm
Cooling water pipe bend
Org. Art.-Nr: 4956119
LT-Art.-Nr: 1180403
CHF 139.60
Cooling water hose 42x52x155mm
Org. Art.-Nr: 4950088
LT-Art.-Nr: 1000809
CHF 16.50
Container for cold start device
Org. Art.-Nr: 5135039
LT-Art.-Nr: 1000730
CHF 31.85
Cold start valve CAV
Org. Art.-Nr: 9956296
LT-Art.-Nr: 1009369
CHF 203.60
Bracket tank right Occasion
Org. Art.-Nr: 5011804-SH
LT-Art.-Nr: 1081714
CHF 342.00
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Bracket tank left Occasion
Org. Art.-Nr: 5011578-SH
LT-Art.-Nr: 1081713
CHF 342.00
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Bracket
Org. Art.-Nr: 5118573
LT-Art.-Nr: 1000713
CHF 4.80
Bosch injection pump in exchange
Org. Art.-Nr: DAG-VE/CL134-4
LT-Art.-Nr: 1017297
CHF 2,150.00
Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop does not assume any assembly and disassembly costs.
This is an alternative pump to the Bosch version, which is no longer available.
New shut-off via ignition lock and solenoid valve.

Injection lines, gas actuation, feed line, return line and shut-off via ignition lock must all be adjusted!
Therefore, adjust according to the textbook (markings are no longer correct).
Before replacing the pump, wash the engine clean! Check fuel (petrol, water or other impurities).
If the pump is mechanically defective, it is essential to replace the fuel and flush it out because of microchips. 1.

1. set engine flywheel to start injection Inject Bosch (working stroke 1 cylinder) (cover on left side of flywheel)
Turn the pump in the direction of rotation until the keyway is aligned with the first cylinder at the pipe connection nipple. 3.
Install the injection pump (note that the markings on the injection pump gearwheel no longer match). 4.
4. fine adjustment with dial gauge (Inject Bosch at flywheel, the injection pump piston must have 1 mm stroke).
Can be measured with a dial gauge on the plug in the middle of the injection line connections on the injection pump.

(Attention: For 3 cylinder injection pumps the piston of the 6 cylinder pump was used!)
Angle drive speedometer M16x1mm - Ø14.5mm
Org. Art.-Nr: 4177683
LT-Art.-Nr: 1001186
CHF 59.40