CHF 58.00
CHF 58.00
excl. VAT
Available: 1.0 Units
This combination does not exist.
Units of Measure: Units
Add to basket
Orange new in combination with brown chassis
Product information:
Spray can with 2-component technology, lacquer and hardener in one spray can.
Properties:
-You get a solvent and petrol resistant surface!
-High coverage
-High-quality 2-component acrylic lacquer
-Scratch-resistant
-Solvent-resistant
-High coverage, quick-drying
-Professional spray can with wide-jet spray head (spray pattern similar to spray gun) enables fine and perfect atomisation
-No clear coat needs to be used
-Professional paint result.
Technical information:
Well-preserved factory or old paintwork must be sanded.
Sand, clean and prime the substrate!
The hardener contained in the can is only released at the push of a button. At this point, the chemical reaction between the paint and hardener begins.
Shake can thoroughly for 2 minutes before releasing
Remove the red push button from the cap. Turn can
by 180° and place the push button on the pin in the base of the can.
Place the can with the cap upside down on a firm surface.
upside down. Press the red release button with the heel of your hand
(colour and hardener mix)
Shake can again thoroughly for 2 minutes after release.
Test spray to check compatibility with the substrate and colour tone
Apply the paint in 2-3 spray coats with approx. 5 minutes intermediate flash-off time.
Spray distance 15-20cm
Depending on the colour, 2 to 3 sprays with 5 minutes intermediate drying time
Dust-dry 50 minutes, touch-dry 12 hours, polishable 24 hours (20°C)
Coverage per can 0.5-1M²
Application must take place within 12 hours!
For longer breaks, spray the can upside down to rinse out any remaining paint.)
Depending on the temperature and time, chemical bonding takes place inside and
clumps together.
Checkout
