Filters
Name: A bis Z
Shop
68 artikel gefunden.
  1. Shop
  2. Land
  3. Fiat
  4. 450 | 850 | 1000 | 1300
  5. Motor - 68 Artikel
Sortieren nach :
Name: A bis Z
Filters
  • Brand
  • Labels
  • Tags
RESET
Adjusting screw valve tappet
Org. Art.-Nr: 4699783
LT-Art.-Nr: 1000624
CHF 6.65
Anlaufscheibe
Org. Art.-Nr: 4600377
LT-Art.-Nr: 1005037
CHF 11.80
Balance weight housing
Org. Art.-Nr: 4600361
LT-Art.-Nr: 1175939
CHF 737.75
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Banjo bolt M12x1.5x33
Org. Art.-Nr: 598311
LT-Art.-Nr: 1180312
CHF 9.15
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Bearing bolt 31.50mm
Org. Art.-Nr: 4748800
LT-Art.-Nr: 1180275
CHF 1.00
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Bearing flange balance weight (SECOND HAND)
Org. Art.-Nr: 4600375-SH
LT-Art.-Nr: 1072687
CHF 60.00
Flange with 2 bearing bushes for shaft 32mm
hole distance 100mm
Casting number 4600389
Bolt
Org. Art.-Nr: 4600380
LT-Art.-Nr: 1180330
CHF 122.15
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Bolt 32/36x75mm
Org. Art.-Nr: 4600385
LT-Art.-Nr: 1065312
CHF 148.40
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Bosch injection pump in exchange
Org. Art.-Nr: DAG-VE/CL134-4
LT-Art.-Nr: 1017297
CHF 2,150.00
Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop does not assume any assembly and disassembly costs.
This is an alternative pump to the Bosch version, which is no longer available.
New shut-off via ignition lock and solenoid valve.

Injection lines, gas actuation, feed line, return line and shut-off via ignition lock must all be adjusted!
Therefore, adjust according to the textbook (markings are no longer correct).
Before replacing the pump, wash the engine clean! Check fuel (petrol, water or other impurities).
If the pump is mechanically defective, it is essential to replace the fuel and flush it out because of microchips. 1.

1. set engine flywheel to start injection Inject Bosch (working stroke 1 cylinder) (cover on left side of flywheel)
Turn the pump in the direction of rotation until the keyway is aligned with the first cylinder at the pipe connection nipple. 3.
Install the injection pump (note that the markings on the injection pump gearwheel no longer match). 4.
4. fine adjustment with dial gauge (Inject Bosch at flywheel, the injection pump piston must have 1 mm stroke).
Can be measured with a dial gauge on the plug in the middle of the injection line connections on the injection pump.

(Attention: For 3 cylinder injection pumps the piston of the 6 cylinder pump was used!)
Büchse
Org. Art.-Nr: 4607851
LT-Art.-Nr: 1005063
CHF 23.35
Innendurchmesser: 24 mm
Breite: 20.7 mm
Aussendurchmesser: 27.7 mm
Cone hub KW front
Org. Art.-Nr: 4655845
LT-Art.-Nr: 1005092
CHF 607.85
Dieser Artikel wird Kundenspezifisch bestellt und kann nicht Retour gegeben werden !
Cone hub KW front Used
Org. Art.-Nr: 4655845-SH
LT-Art.-Nr: 1180785
CHF 516.00