Filters
Name: A bis Z
Kategorien
Shop
511 artikel gefunden.
  1. Shop
  2. Land
  3. Fiat
  4. 450 | 850 | 1000 | 1300 - 511 Artikel
Sortieren nach :
Name: A bis Z
Filters
  • Brand
  • Labels
  • Tags
RESET
Bolt 35x102mm
Org. Art.-Nr: 596188
LT-Art.-Nr: 1004586
CHF 35.70
Bolt 35x141mm
Org. Art.-Nr: 4966046
LT-Art.-Nr: 1001575
CHF 243.55
Bolt 6x42mm
Org. Art.-Nr: 4974477
LT-Art.-Nr: 1002774
CHF 18.30
Bolt 8x26mm
Org. Art.-Nr: 9932585
LT-Art.-Nr: 1009350
CHF 13.45
Bolt for steering cylinder 20x51mm
Org. Art.-Nr: 4962571
LT-Art.-Nr: 1003780
CHF 65.25
Bolt front axle 38x345mm
Org. Art.-Nr: 4965868
LT-Art.-Nr: 1001566
CHF 151.40
Bolt steering cylinder 14/22x61mm
Org. Art.-Nr: 4966278
LT-Art.-Nr: 1003785
CHF 36.90
Bolt to drawbar Kobler 19x162/120mm
Org. Art.-Nr: 11106133-0
LT-Art.-Nr: 1016117
CHF 21.75
Bonnet closure Oro
Org. Art.-Nr: 9967031
LT-Art.-Nr: 1009615
CHF 139.70
Bonnet front part
Org. Art.-Nr: 4953308
LT-Art.-Nr: 1003681
CHF 529.85
Bonnet locking bolt
Org. Art.-Nr: 4950422
LT-Art.-Nr: 1002201
CHF 16.80
Bosch injection pump in exchange
Org. Art.-Nr: DAG-VE/CL134-4
LT-Art.-Nr: 1017297
CHF 2,150.00
Warranty conditions
12 months manufacturer's warranty from date of delivery.
The warranty expires if,
- The installation is not carried out by a qualified professional.
- The pump is opened or otherwise tampered with.
- If the wrong or contaminated operating materials are used.
The LT-Shop does not assume any assembly and disassembly costs.
This is an alternative pump to the Bosch version, which is no longer available.
New shut-off via ignition lock and solenoid valve.

Injection lines, gas actuation, feed line, return line and shut-off via ignition lock must all be adjusted!
Therefore, adjust according to the textbook (markings are no longer correct).
Before replacing the pump, wash the engine clean! Check fuel (petrol, water or other impurities).
If the pump is mechanically defective, it is essential to replace the fuel and flush it out because of microchips. 1.

1. set engine flywheel to start injection Inject Bosch (working stroke 1 cylinder) (cover on left side of flywheel)
Turn the pump in the direction of rotation until the keyway is aligned with the first cylinder at the pipe connection nipple. 3.
Install the injection pump (note that the markings on the injection pump gearwheel no longer match). 4.
4. fine adjustment with dial gauge (Inject Bosch at flywheel, the injection pump piston must have 1 mm stroke).
Can be measured with a dial gauge on the plug in the middle of the injection line connections on the injection pump.

(Attention: For 3 cylinder injection pumps the piston of the 6 cylinder pump was used!)