PTO shaft front PTO 500mm

SERIES TNS and TNF

DESCRIPTION: To improve the durability and reliability of the front PTO drive
front PTO drive train, the following changes have been made:.
changes have been made:
The wide angle joint flange and the clutch flange have been
flange have been modified to prevent the fasteners from becoming
the mounting parts become loose and break off.

From axle serial number: 3K.362299*CV*SP Tractor serial number: 1320357
The following changes have been made
1. for fastening the wide angle joint to the coupling flange (old
(old 5189836) a new flange 47127507 with cylindrical pin and six fixing bolts are now used (previously there were only four bolts).
four screws). The screws now used have the following dimensions
M8 x 25 mm, strength class 10.9 (previously M8 x 18 mm, strength class 8.8). 2.


2. the grooves of the circlips in the front upper shaft have been
shaft were enlarged to accommodate the new, stronger circlips.
to accommodate the new, stronger circlips.
For units with front axles before the affected serial number:
1. if the fastening parts of the flange become loose or break off
or break off, it is recommended to fit the improved parts.
Secure the bolts with the threaded
1062153 or (Loctite 242).
Tighten the bolts evenly to a torque of 32 Nm.
torque of 32 Nm. 2.
If defects occur in the circlips 11067376, it is recommended that the new shaft
it is recommended to fit the new shaft 47127504 with the new circlips 5117075.
5117075 with the new circlips.