Repair kit PTO clutch

LT part number: 1016190
Original item number: 1-35-727-515
Article specification:
Brand: CNH
Synonyms: 135727515
Tags: TN95DA T4050 TN70DA TN75DA T4030 T4040 TN85DA JXC Quantum C Steyr

CHF 2,072.65

CHF 2,072.65

excl. VAT
Available: 1.0 Units

    This combination does not exist.

    Units of Measure: Units
     Add to basket

    Product information:

    Install two O-rings between the flange and the drive shaft.
    Noise or chattering of the front PTO drive shaft.

    The chattering noise is generated between the teeth from the flange (part number 1-35-727-805) and the drive shaft splines (part number 1-35-727-808).
    If the chattering noise occurs, perform the following procedure to reduce the noise:
    Remove the 6 retaining bolts from the front PTO housing (three bolts on the left and three on the right).
    Disconnect the 18 bar supply to the front PTO.
    Remove the hexagon socket fixing screw marked in figure 2.
    Pull out the front PTO gearbox with the drive shaft by about 20 cm.
    Unscrew the second hexagon socket screw.
    Remove the drive shaft from the gearbox.
    Grind a 5 mm deep chamfer (angle) with an angle of 45 degrees at the end of the drive shaft.
    Lubricate the chamfer with some grease.
    Insert the two O-rings into the flange without grease.
    Install the front PTO with the drive shaft and secure the Allen screws with threadlocker (such as Loctite 242).
    Spare parts: 2x 84229189

     Checkout


    Quality parts
    Original & OEM
    Return right
    10 days
    Next day delivery
    in Switzerland
    Worldwide
    Delivery with UPS

    Share this article

    No Specifications
    Accessories
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.
    Recently viewed articles