Wheel bolt M18x1.5x65mm reinforced 10.9

LT part number: 1014526
Original item number: 87651028
Article specification:
Brand: CNH
Synonyms: 44011089 44016584 5102745 8995014 N87651028 44011089
Tags: 680 780 880 980 T4.75 T4.85 T4.95 T4.105 T4.115 85-90 88-94 70-90 80-90 72-94 82-94 90-90 100-90 110-90 880-5 1180 1280 1380 1580 T4.105HI-LO T4.95HI-LO T4.85HI-LO T4.75HI-LO T4.115HI-LO 85-90DT

CHF 12.15

CHF 12.15

excl. VAT
Available

    This combination does not exist.

    Units of Measure: Units
     Add to basket

    Strength: 10.9
    Thread pitch: 1.5 mm
    Length: 65 mm
    Thread: M18

    Product information:

    MODELS AFFECTED: T6010, T6020, T6030, T6040, T6050, T6060, T6070, T6080
    TS100A, TS110A, TS115A, TS125A, TS130A, TS135A

    FRONT AND REAR WHEEL NUTS ON ALL-WHEEL DRIVE MODELS
    Wheel nuts have been improved to enhance durability on four-wheel drive models.
    Frequent wheel changes can cause the threads to wear, or the wheels can become loose if not properly maintained.
    The new wheel nuts were introduced into production from the following serial numbers:
    T6000 series: Z8BD10290 Z8BK10290
    The threaded bolts of the rear wheels are now longer and the previous single nut-washer versions have been replaced by one-piece nut-washer versions. This results in a finish with the thread and improves the fastening of the wheels.
    The bolts for the front wheels have been replaced by threaded bolts, which also use one-piece nut-washer versions This also leads to a better fastening for the front wheels.
    Note: The washer can rotate freely on the nut.

    For machines before the affected serial numbers:
    If damaged wheels, wheel hubs or wheel bolts need to be replaced, or if these parts keep loosening, it is recommended to fit the appropriate new parts.
    Wheel fixing information:
    The following information must be passed on to the customer or driver.
    After fitting the new parts, or if wheel settings are changed, the wheel fasteners must be tightened according to the following instructions
    wheel fasteners must be tightened and serviced according to the following procedure. 1:
    1. tighten the wheel nuts between the rim and the axle hub according to the following specifications.
    Front wheels (all-wheel drive): Tightening torque: 211 Nm
    Rear wheels: Tightening torque: 250 Nm. 2.
    Drive the tractor for 6-10 minutes and then tighten the wheel nuts according to the instructions. 3.
    After one hour of operation, tighten the wheel nuts according to the instructions. 4.
    4. thereafter tighten the wheel nuts daily according to the instructions until the bolts are set according to the appropriate tightening torques, i.e. they can no longer be moved when retightened.
    The previous parts can be completely replaced by the new parts.

    Part numbers
    44011089 Threaded bolt - rear axle new 87651029 (low stress axle)
    5102745 Threaded bolt - rear axle new (heavy duty axle) 87651028
    47126162 Threaded bolt - rear axle new(rod axle) 87651027
    12164224 Washer new 87651026
    44011091 Nut new 87651026
    11390534 Bolt - Front Hub new 87618916 Stud bolt
    5100516 Washer - Front Hub new 87678013

     Checkout


    Quality parts
    Original & OEM
    Return right
    10 days
    Next day delivery
    in Switzerland
    Worldwide
    Delivery with UPS

    Share this article

    No Specifications
    Accessories
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.
    Recently viewed articles