CHF 34.60
CHF 34.60
excl. VAT
Available
This combination does not exist.
Units of Measure: Units
Add to basket
Strength: 10.9
Thread pitch: 1.5 mm
Length: 85 mm
Thread: M18
Product information:
PRODUCT INFORMATION
AFFECTED MODELS:
T6010, T6020, T6030, T6040, T6050, T6060, T6070, T6080
TS100A, TS110A, TS115A, TS125A, TS130A, TS135A
FRONT AND REAR WHEEL NUTS ON ALL-WHEEL DRIVE MODELS
Wheel nuts have been improved to enhance durability on four-wheel drive models.
Frequent wheel changes can cause the threads to wear, or the wheels can become loose if not properly maintained.
The new wheel nuts were introduced into production from the following serial numbers:
T6000 series: Z8BD10290 Z8BK10290
The threaded bolts of the rear wheels are now longer and the previous single nut-washer versions have been replaced by one-piece nut-washer versions.
This results in a finish with the thread and improves the fastening of the wheels.
The bolts for the front wheels have been replaced with threaded bolts also using one-piece nut-washer versions This also results in better fastening for the front wheels.
Note: The washer can rotate freely on the nut.
For machines before the affected serial numbers:
If damaged wheels, wheel hubs or wheel bolts need to be replaced, or if these parts keep loosening, it is recommended to fit the appropriate new parts.
Wheel fixing information:
The following information must be passed on to the customer or driver.
After fitting the new parts, or if wheel settings are changed, the wheel fasteners must be tightened and serviced according to the following procedure. 1:
1. tighten the wheel nuts between the rim and the axle hub according to the following specifications.
Front wheels (all-wheel drive): Tightening torque: 211 Nm
Rear wheels: Tightening torque: 250 Nm. 2.
Drive the tractor for 6-10 minutes and then tighten the wheel nuts according to the instructions. 3.
After one hour of operation, tighten the wheel nuts according to the instructions. 4.
4. thereafter tighten the wheel nuts daily according to the instructions until the bolts are set according to the appropriate tightening torques, i.e. they can no longer be moved when retightened.
The previous parts can be completely replaced with the new parts.
Part numbers
44011089 Threaded bolt - rear axle new 87651029 (low stress axle)
5102745 Threaded bolt - rear axle new (heavy duty axle) 87651028
47126162 Threaded bolt - rear axle new(rod axle) 87651027
12164224 Washer new 87651026
44011091 Nut new 87651026
11390534 Bolt - Front Hub new 87618916 Stud bolt
5100516 Washer - Front Hub new 87678013
Checkout
