Torsional damper clutch hub 35x40-14Z

Outer diameter: 262 mm
Number of teeth: 14

Mounting flywheel = flywheel side

TL70A TL80A TL90A TL100A
To improve durability and reliability, clutch damper disc 47126701 and flywheel 47133981 have been changed.
The new clutch damper disc 87527552 is now offset inwards towards the direction of the flywheel.
The new position prevents the friction housing of the damper disc from being contaminated by lubricant.
Contamination in the friction housing leads to reduced friction and can cause the following problems:
Rattling noise at low idle speed
Premature wear
Damper spring breakage

The new flywheel 87544081 has different internal dimensions to allow clearance for the new clutch damper disc.
for the new clutch damper disc
If the clutch damper disc fails, you can proceed as follows to avoid having to fit a new flywheel. Rework the original flywheel, diameter 201mm(+0.5mm) depth 20mm(+0.5mm) radius in the corner 2.4-3mm.
Then install the flywheel together with the new clutch damper disc 87527552.
Do not apply any grease or other lubricants to the splines of the torsional damper drive plate or the splines of the gearbox input shaft.
Dimensions of the new clutch damper disc:
Diameter O.D. 262mm 6 holes 10.5mm DK239mm Hub 35x40mm 14 teeth.
2 single springs 4 double springs