Main brake cylinder Bosch

LT part number: 1014044
Original item number: 84558759
Article specification:
Brand: CNH
Synonyms: 3666220M91 MCB25.07M N84558759 82018664 82006194 87343615 3666220M92
Tags: 7635 L85 L95 TL90 TL100 8360 8560 M135 M160 TM125 TM135 TM140 TM150 TM165 4835 5635 L65 L75 TM120 TM130 TM155 4635 L60 TL70 TL80 TM115 8160 8260 M115 M100

CHF 193.05

CHF 193.05

excl. VAT
Available: 2.0 Units

    This combination does not exist.

    Units of Measure: Units
     Add to basket

    Product information:

    Improvements to the master brake cylinder 82018664 to prevent loss of braking power Series 35/L/TL/JXU
    One or both brake pedals go all the way to the floor (loss of braking effect).
    If a piston of the brake master cylinder is not in the fully idle position, the equalising line is open. This allows pressurised oil from the master cylinder to be drained directly into the brake fluid reservoir.
    Replace the existing master cylinders with the new master cylinder 84558759

    On tractors with master cylinders 82006194, a total loss of brake pressure can occur if the driver leaves his foot on one brake pedal, exerting slight pressure, and then presses the other brake pedal. This condition is caused by the master cylinder connection to the equalising line being partially open. The partially open connection allows the oil in the equalising line to reach the brake oil reservoir. When the other brake pedal is then depressed, instead of building up pressure, the oil simply flows through the equalisation line and through the partially open connection of the other brake master cylinder into the reservoir.
    Result = pedal on the floor - no braking power.
    The new Bosch master cylinder opens the connection to the equalising line in a raised piston travel position. This prevents the pressurised oil from flowing back into the reservoir.
    In some cases, it has been found that air can enter the brake master cylinder 82018664 when the brakes are applied. To prevent this, a new brake master cylinder has been introduced into production.
    The new master cylinder has improved sealing properties, a revised lip seal and an additional sliding seal.


    LT recommends installing only the original CNH Bosch 84558759 !

     Checkout


    Quality parts
    Original & OEM
    Return right
    10 days
    Next day delivery
    in Switzerland
    Worldwide
    Delivery with UPS

    Share this article

    No Specifications
    Accessories
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.
    Recently viewed articles