Clutch cable travelling clutch 820mm

Length: 820 mm

New reinforced design with improved adjustment options and improved sealing (square head at the top replaces the fork-shaped end piece)
TD5000 in series from Z9JN52727 Production Ankara
from Z9JN10420 Production Jesi

Service Bulletin 2009-028
For tractors with a suspended transmission clutch pedal in the cab, the clutch cable has been
the clutch cable has been improved.
The previous clutch cable could only be adjusted to a limited extent. It also happened
that after a certain time and period of use, dirt got into the inside of the clutch cable.
inside the clutch cable. This led to blocking or jamming of the inner clutch cable.

When replacing the clutch cable, it is recommended that only a new cable is fitted as a spare part.
By replacing the fork-shaped end piece with the new eyelet-shaped connecting piece
The replacement of the fork-shaped end piece with the new eye-shaped connecting piece does not change the installation process or the location of the cable.
After you have positioned the outer cable in the support bracket underneath the clutch pedal
and secured with a locking ring, the cable automatically aligns itself
to the centre of the U-shaped bracket welded to the clutch pedal.
Pull out the inner cable and align the opening on the eyelet-shaped
with the openings on each side of the U-shaped bracket and fit the shaft.
and fit the shaft. Fit the washer and retaining clip to the shaft.
Information on adjusting and moving the clutch cable can be found in the workshop manual,

Parts required for conversion
1x11066276 circlip
1x5175716 Bolt
1x11063971 Clamp
1x12601279 Washer