Alternator 14V 65A

Rated current: 65 A

Attention
Denso alternator no longer available from CNH!
When fitting TNF and TNV, the exhaust guard may have to be adapted!

Connections:
B+
W= connection for engine speed
V-belt pulley 2 compartments Ø 87mm
If the Denso fails prematurely, the inner carbon brush could be worn out prematurely.
Take new regulator 9970176

If the charge control of the vehicle lights up, this is
always a clear sign of a fault in the power supply. A possible cause is that the
generator is no longer supplying power.
If error messages appear immediately after repairs in the vicinity of the generator, the problem may have been caused by improper work.
improperly carried out work.
The most common sources of faults:
If the circuit is not interrupted during the installation of a new generator and the positive cable
(B+) touches the housing of the regulator, for example,
a short circuit and complete failure of the generator can occur.
If, when connecting a new generator, the
If, when connecting a new generator, the cable connections of terminal D+ and B+ are mixed up,
the excitation diodes and the voltage regulator can be
can be damaged during operation.
If the battery is disconnected while the engine is running
the engine is running, the excitation diodes can be damaged or destroyed
damaged or destroyed by excessive currents.
Continuous operation at the thermal and/or mechanical
or mechanical limits of the generator (e.g. due to a heavily
heavily contaminated diode plate, insufficient supply of cooling air
insufficient supply of cooling air or high load demand at low
speed) can also lead to damage to the generator.
lead to