Cloche d'embrayage Embrayage A

Numéro d'article LT: 1008336
Numéro d'article original: 5181843
Spécification de l'article:
Marque: CNH
Synonyms: E05181843
Tags: T4.75 T4.85 T4.95 T4.105 T4.115 TL90 TL100 TL90A TL100A TL70A TL80A T5.95 TL70 TL80 T5030 T5040 T5050 T5060 T5070 T5.105 T5.115

CHF 1'890.65

CHF 1'890.65

hors TVA
Disponible: 1.0 Unité(s)

    Cette combinaison n'existe pas.

    Unités de mesure: Unité(s)
     Ajouter au pannier
    Informations sur les produits:

    The transmission and PTO have recently stopped running without an error code being displayed in the analogue digital instrument cluster (ADIC).

    The splined connection of the drive shaft and Powershuttle clutch housing has worn prematurely and therefore has no drive.

    This symptom mainly occurs in an operating range of 700 - 1500 operating hours, but can also occur after very few operating hours (less than 100 hours).

    Premature wear of the splines is caused by:

    Poorly machined dowel pin holes on the drive shaft bearing cover, resulting in misalignment of the drive shaft to the Powershuttle clutch housing profile.

    Missing dowel pins on the front transmission spacer.

    If the above symptom is identified and worn drive shaft and clutch housing splines are found, the following procedure should be followed:

    Replace all parts affected by wear such as drive shaft (part number 84470224) and clutch housing (part number 5181843).

    Check for the two dowel pins (part number 4988170) on the front gearbox spacer (part number 84488918), order and fit them if required.

    Replace the drive shaft bearing cover and order a new cover (part number 5181855) from the parts shop. Check that both locating pins are fitted.

    Note: The new bearing cover from the parts store is supplied without the ball (part number 20063460) fitted. Either the ball from the old cover must be re-used or a new ball must be ordered from Spare Parts Logistics.

    The correctly machined drive shaft bearing cover was introduced in production from the following serial number:

    ZHJM02111.
    ZHJK02112

    1x Output shaft 84470224
    1x Clutch bell 5181843
    1x Cover 5181855
    1x Ball (if required) 20063460
    2x Dowel pin (if required) 4988170

     vers la caisse


    Pièces de qualité
    Original & OEM
    Droit de retour
    10 jours

    Livraison le lendemain
    en Suisse
    Dans le monde entier
    Livraison par UPS

    Partage cet article

    No Specifications
    Accessoires
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.
    Articles récemment consultés